Process Of Using A Motorcycle Visor Cleaner
Given the risky nature of bike riding, a good quality helmet that is well maintained is necessary. Clean helmet will be a good addition to a rider's journey be it short or long. To achieve this, one needs a good motorcycle visor cleaner for that clarity of view and shine of the helmet. It is advisable to use good brands that are easily available in the market.
Cleaning a helmet may not be as simple as it looks. For thorough cleaning, the helmet needs to be dismantled and this requires a knowhow and right tools. Poor quality detergent and tools will damage the helmet therefore causing poor vision when riding. When a person is not sure of how to do it, the professionals should be left to clean.
Nowadays, manufacturers of the cleaning products pack them with the cleaning clothes so that the users don't damage their helmets with non recommended material. They provide you with soft clothes or sponges for the job. Inspect to be sure the sponge will not scratch the helmet and the cleaning chemical is safe for your hands and eyes in case of an accident.
In the process of cleaning your motorcycle helmet, cotton buds and brushes may be needed. Once you have all the necessary material, find an open space and get to work. Consider doing this with the sun up so as to speed up the process of drying the helmet both outside and inside. Use a counter or wide table so as to make your work easy.
Your hands need to be washed first before starting the cleaning process. Ensure the brushes and cotton buds are clean and smooth. Failure to observe this may result in tear or scratch in the helmet. If it is your first time or when not familiar with the parts of the helmet, take a picture so as to have it easy when reassembling the pieces.
As soon as you're ready with all that is required, it is time to lay on the table the helmet. Remove the parts and screws one by one and lay them in order of removal. The helmet pads and inner lining are removed and soaked in warm water with a visor disinfectant.
Using a clean sponge that is non invasive, clean the visor. Your fingers will move through and around the glass feeling for any dirt to be removed. The brushes are used to clean the unreachable parts of the shell then use a soft cloth to shine the surface of the shell. Once the visor is dry, spray a coat on it to prevent fogging.
Wait for all the parts to dry fully before starting the reassembly process. Ensure you lubricate the parts with grease to prevent friction and keep rust away. Using the photos taken earlier, confirm piece by piece as you assemble the parts. Tighten all the screws well then apply a thin coat of shine on the helmet surface to make it shiny and new looking. When through, keep the remaining motorcycle visor cleaner in a safe place away from children and direct sunlight. It can be reused many times depending on its quantity and the cleaning needs of every individual helmet.
Cleaning a helmet may not be as simple as it looks. For thorough cleaning, the helmet needs to be dismantled and this requires a knowhow and right tools. Poor quality detergent and tools will damage the helmet therefore causing poor vision when riding. When a person is not sure of how to do it, the professionals should be left to clean.
Nowadays, manufacturers of the cleaning products pack them with the cleaning clothes so that the users don't damage their helmets with non recommended material. They provide you with soft clothes or sponges for the job. Inspect to be sure the sponge will not scratch the helmet and the cleaning chemical is safe for your hands and eyes in case of an accident.
In the process of cleaning your motorcycle helmet, cotton buds and brushes may be needed. Once you have all the necessary material, find an open space and get to work. Consider doing this with the sun up so as to speed up the process of drying the helmet both outside and inside. Use a counter or wide table so as to make your work easy.
Your hands need to be washed first before starting the cleaning process. Ensure the brushes and cotton buds are clean and smooth. Failure to observe this may result in tear or scratch in the helmet. If it is your first time or when not familiar with the parts of the helmet, take a picture so as to have it easy when reassembling the pieces.
As soon as you're ready with all that is required, it is time to lay on the table the helmet. Remove the parts and screws one by one and lay them in order of removal. The helmet pads and inner lining are removed and soaked in warm water with a visor disinfectant.
Using a clean sponge that is non invasive, clean the visor. Your fingers will move through and around the glass feeling for any dirt to be removed. The brushes are used to clean the unreachable parts of the shell then use a soft cloth to shine the surface of the shell. Once the visor is dry, spray a coat on it to prevent fogging.
Wait for all the parts to dry fully before starting the reassembly process. Ensure you lubricate the parts with grease to prevent friction and keep rust away. Using the photos taken earlier, confirm piece by piece as you assemble the parts. Tighten all the screws well then apply a thin coat of shine on the helmet surface to make it shiny and new looking. When through, keep the remaining motorcycle visor cleaner in a safe place away from children and direct sunlight. It can be reused many times depending on its quantity and the cleaning needs of every individual helmet.
About the Author:
You can visit the website www.cyclewipes.com for more helpful information about Tips On Using A Motorcycle Visor Cleaner
publié par Unknown @ 12:26
0 commentaires
0 commentaires:
Enregistrer un commentaire
Abonnement Publier les commentaires [Atom]
<< Accueil