dimanche 2 octobre 2016

Step By Step On Driving Stick Shift Car

By James Lee


Devices are different in the way we use them since they depend on the manufacturer. On cars, the manufactures has brought about two different types of driving which are all accurate and important to understand. If used to pouring an automatic car, you must learn driving stick shift car too in order to be able to get everything right in case given a manual car to drive your boss.

To begin with, you are supposed to learn how to drive this model of vehicle when you are free and practice the moves on a place where there are no movements of people. This is to make sure you do not cause accidents in which are fatal and prosecutable. Therefore look for an open ground most probably at play ground during the time when no activities are taking place in the field.

After getting in the car and making yourself comfortable, you are supposed to push the clutch in before starting the locomotive to check if gears were disengaged when the engine was stopped. Therefore must make sure your gear lever is free by ensuring it is moving from one side to the other freely. By making sure the care is on safe grounds, you can now start the engine.

Then, push the clutch in and ensure all gears are disengaged by swinging the lever from one side to the other. On this time, you can start the engine and step on clasp to engage the starting gear. This should be done slowly as you press gas pedal slowly by also releasing the seize on the same pace. The car will start moving when the engine gains more power and you will have to completely release hang on to pedal and push the accelerator to a manageable speed.

Pouring is simple then you need to push the clutch in again while releasing the acceleration pedal. This should be done at once and engage the gear number two when the clutch is at the bottom. You must know the number two gear is on the furthest end just opposite the number one. The auto will continue moving with the same speed and locomotive sound will change.

You will have to change the gear after some time and this will be hard if you have no idea what to do. Therefore you need to step on the clutch and push it in while releasing the gas pedal at the same speed. Once hang on to pedal is down, drop the lever from number one to number two which is just below number one past the neutral.

After a while, you must stop the car using the instructions given to avoid making the engine stop abruptly. Therefore you must release the accelerator and by using the same leg, apply brakes and start pressing them slowly till you reach to a lower speed then you can push the clutch in fully. The car will stop after some minutes and you will have to turn off the engine. Before turning off, disengage all the gears and pull the handbrake to ensure after releasing the brakes, the vehicle will not move.

When stopping, you have to start by releasing the gas pedal without stepping on the clutch and by the use of the same leg released the gas, step on brakes slowly and wait for the car to get to a lower speed then step on clasp. After stopping, you have to pull the handbrake and then disengage all the gears leaving the car at neutral before switching off the engine.




About the Author:



0 commentaires:

Enregistrer un commentaire

Abonnement Publier les commentaires [Atom]

<< Accueil